Wismec Venti Kit

Stevo here from the Belfast Vape Bar and today we have a little hardware review, thanks to the guys from our Featured Vendor Vaper’s Bounty we have the Wismec Venti Kit for review!

This product has been described as a beefed out Ego One Mini and after taking the initial look over the product it’s safe to say the above statement is very accurate!

The Wismec Venti Kit arrives in a standard cardboard box with all the specifications for the device on the rear.


1× Venti Mouthpiece
1× Venti Atomizer Tube
2× Venti Atomizer Head (1.0 /0.5ohm)
1× Venti Atomizer Base
1× Venti Battery
1× Wall Adapter(1A)
1× USB Cable
1× Manual

Product Info:

  • Diameter: 30mm
  • Length: 112.7mm
  • Color: silver
  • Liquid capacity: 5.8ml
  • Battery capacity: 3000mAh
  • Thread type: 510 Thread
  • Rated resistance range: 0.15Ω-5.0Ω
  • Low voltage battery protection shutdown at 3.3V
  • High resistance detection; battery shutdown at 5 ohms or more

After reading through the product’s specifications, two things leaped off the box straight away. One being the massive 5.8ml capacity and the second being the 3000 mAH battery capacity, this just screams out “All day vape”. If I’m out and about all day, the last thing I want is for a mod to die!

This kit is ideal for anyone who is looking to start sub-ohming or if you’re just looking for a sturdy, well built device without all the bells and whistles.

With the 0.5Ω coil head installed (for the straight lung inhale) there is much better vapour production and is definitely this reviewers preferred coil. Flavour is ok but the airflow is still rather restricted, even with the two large air intakes on the tank.

The Wismec Venti Kit takes the same coils as the Joytech Ego One. This device has a Rated resistance range of 0.15Ω-5.0Ω and a spring loaded 510 connection allowing you to use a 30mm RDA.

*Please note that this device does not have variable wattage so please use the necessary precautions when building and build within the above mentioned range*

As mentioned before, the battery in this kit has a capacity of 3000 mAH, as there is no display on this device the remaining battery is shown through the LED. I have been using this device for nearly two days and the LED indication still hasn’t changed making this an ideal kit for all day use!

From flat, the battery takes roughly four hours to charge.

Just in case you forget to switch the device off in your pocket, the battery has a 10 second cut off.

One of the only downsides to this device is the rather restricted airflow (even with the described cloud chaser coil head). The airflow on the tank is quite large with it’s two large airflow holes on the base.

Controlling the airflow is also quite tight to adjust, also adjusting the airflow ring turns the same direction as loosening the tank so adjust carefully. Having the airflow ring turn the opposite direction would be a very welcome change!

With it’s stainless construction the Venti kit is quite heavy weighing 440g. Not necessarily a con but shows that the device will be able to sustain a few knocks and drops.

You can buy the Wismec Venti Kit right now from the Vapers Bounty website by clicking the image below for £45, yes there are cheaper kits available on the market but with the battery and tank capacity it’s competitively priced!

Vapers Bounty Logo

Now, let’s talk about some of the Pros/Cons of this kit and bring this review to a close.


  • Huge liquid capacity
  • Large battery for an all day vape
  • Sturdy construction
  • Charges through USB


  • Airflow is rather restricted compared to other tanks on the market
  • No screen to show battery life
  • Only two different coils available
  • Device is a little on the heavy side

Would I buy one of these kits?

Yes I would! For the pure convenience of the large tank and battery life and ease of use. This is definitely a great device if you’re on the go or if you’re like me and need a quick and easy vape when gaming 😛